Drone Maintenance - Best practice

It is a super simple instrument but its doing is a perfect job. And also it is pretty cheap and easy to work with it. All its doing is to blows air in certain parts and gets rid of all that dust. When it comes down to cleaning the wiring and the Gimbal part this is just a perfect solution. Simply if you blow several times to your gimbal it should clean out any lust dust. 

Also performing this with the Camera and the camera lens. This is also a very important part to clean up.  

This “Rocket blower” is useful for the other parts also- such as the Motors. Now if you blow into the motors actually you will remove most of the dust. You don’t want to risk having a ton of dust building up with these motors. Because the coils inside the motors need to have clean contact with the magnets. Otherwise, you will lose motor power and eventually get motor failure. So this maintenance with air blower gets guarantees that you will remove all that dust and the motors will work properly and safely. All you got to do is to squeeze in the opening air and any loose dust should fly out. We recommend doing the same upside-down the drone. This way the dust will fly out of the motors. 

Also is good to do this procedure with the Heat sink of the drone. It is very good to clean the Head sink by blowing the dust from it. Next are the Ultrasonic sensors and optical sensors. After that, you can clean also the Collision Sensors.